Navigation:  WebOffice Standard Reference > WebOffice Category > Tools >

GEONIS Net Trace

 Previous pageReturn to chapter overviewNext page

No tool specific properties are available.

 

GEONIS Net Trace tool - WebOffice category

GEONIS Net Trace tool - WebOffice category

 

GEONIS Net Trace Layer specific configuration - WebOffice category

GEONIS Net Trace Layer specific configuration - WebOffice category

 

 

GEONIS Net Trace tool in the WebOffice 10 R3 client

GEONIS Net Trace tool in the WebOffice 10 R3 client

 

Note: For using this tool,

•The tool must be configured in the WebOffice 10 R3 project configuration

•GEONIS server must be installed on the GIS Server,

•The GEONIS server capability must be activated and configured according to the GEONIS server documentation provided by GEOCOM,

•For the Layer a GEONIS net trace element must be configured.

 

Note: In order to optimize performance for GEONIS server, the used Server Object should have at least two instances up and running (minimum instances 2). This reduces time needed for initializing the GEONIS extension a lot.