Export Profile
By configuring Export profiles in WebOffice author standalone a specific link will be established to the WebOffice extract server configuration files.
There are two supported configuration scenarios:
•You may either configure no export profiles in WebOffice author standalone at all. Then WebOffice 10.9 R4 will provide all extract profiles that are saved in the export configuration directory (default path C:\arcgisserver\directories\WebOfficeExport\configuration)
•You can explicitly configure export profiles in WebOffice author standalone. Then WebOffice 10.9 R4 will only provide the extract profiles that have been configured explicitly in the WebOffice 10.9 R4 project configuration, although there might be more available in the configuration directory.
|
To configure an export profile for raster data (GeoTIFF), see chapter Export Profile Raster Data for details. |
Export profiles configuration
Property |
Description |
|---|---|
Profile name |
Name of extraction profile when using WebOffice extract server (display) |
ID |
Profile ID from export configuration files |
Exportprofile Layer-ID |
If the export profile contains a Layer-ID different to the default Layer-ID (TopLevelGroup//Layernam |
Export profiles properties
In general, all possible export file output formats are available for the respective export profile. By configuring Export File Output Formats it is possible to restrict these formats to some specific ones which are then available for selection in the WebOffice 10.9 R4 client.
|
See chapter WebOffice extract server for details about the tool configuration in WebOffice author standalone. |