VertiGIS WebOffice author Standalone 10.8 SP2 - 64bit (Build 108.1.2.7)

Prerequisite:

• Installation of VertiGIS WebOffice 10.8 SP2 - min. Build time: 2021-02-12 - 18:46
• Installation of Microsoft .NET Framework 4.6.2
• Optional: min. VertiGIS UserManagement Admin Web 10.812.0.1
• Optional: Installation of ArcGIS Pro 2.7.x - incl. Microsoft .NET Framework 4.8

Changelog WebOffice author 10.8 SP2+:

Changelog WebOffice author 10.8 SP2:

Changes Build 108.1.2.7 (from 2021-02-12):

• Fixed

  • 51201: Add service wizard does not work for map views
  • 51234: Set Integration Wizard: Field list does not update after changing a layer
  • 51254: ArcGIS Pro Connector does not work if the ArcGIS Pro project contains layers from which you cannot read the CIM definition

• Changed

  • 51275: UserManagement database connection (= GeoProject.dll) for WebOffice 10.8 SP2
  • 51356: VertiGIS Printing Layout Designer compatible with ArcGIS Pro 2.6.x as well as 2.7.x

Changelog WebOffice author 10.8 SP1+:

Changes Build 108.1.1.31 (from 2021-02-03):

• Fixed

  • 51233: Correction of minor typos in the English localization
  • 51235: Print wizard: Error if no category for print templates was configured before

Changes Build 108.1.1.29 (from 2021-01-28):

• Fixed

  • 51254: WebOffice author Connector in ArcGIS Pro does not sort the LayerIDs

Changes Build 108.1.1.28 (from 2021-01-25):

• Fixed

  • 50866: Unable to connect to map services, when ArcGIS Pro is openen and ArcGIS Pro Connector enabled
  • 51108: Error when saving a project configuration
  • 51129: After layer validation of very large map services, many layers are shown as not connected

Changes Build 108.1.1.25 (from 2021-01-22):

• Fixed

  • 50866: Unable to connect to map services, when ArcGIS Pro is openen and ArcGIS Pro Connector enabled

Changes Build 108.1.1.24 (from 2020-12-18):

• Fixed

  • 50875: Layout optimization for the wizard step where you select the objects to be cleaned in the UserManagement database
  • 50920: Optimization of the texts in the wizard for synchronizing the users between two UserManagement databases

Changes Build 108.1.1.21 (from 2020-11-30):

• Fixed

  • 50994: If a restriction is configured on a map view in the UM-DB, cleaning the UM-DB will not work

Changes Build 108.1.1.20 (from 2020-11-23):

• Fixed

  • 50925: When cleaning up the UserManagement database, map services which are still assigned to an orphaned project are not deleted

Changes Build 108.1.1.19 (from 2020-11-20):

• Fixed

  • 50694: Error message when closing WebOffice author standalone

Changes Build 108.1.1.18 (from 2020-11-11):

• Added

  • 50875: Support to select which orphaned entries should be deleted in the wizard for cleaning the UserManagement database

Changes Build 108.1.1.17 (from 2020-11-10):

• Fixed

  • 50838: When cleaning up a User Management database, the orphaned entries must be determined case-insensitively, because otherwise the required layers will be cleaned up
  • 50669: The connection to ArcMap via WebOffice ArcMap Connector will be terminated after about 1 minute if field aliases erroneously contain very rare special characters

Changes Build 108.1.1.15 (from 2020-11-05):

• Fixed

  • 50833: Projects are not updated during a version upgrade if several WMS layers have the same name

Changes Build 108.1.1.14 (from 2020-11-04):

• Fixed

  • 50165: The mosaic layers of a mosaic dataset are not recognized correctly and are therefore not available for configuration
  • 50642: In the status bar there should be a new status for the connectors to ArcMap and ArcGIS Pro with a yellow icon, which indicates that a connection is currently established

Changes Build 108.1.1.10 (from 2020-10-30):

• Fixed

  • 50685: The synchronization between two UserManagement databases is not correct if only the password for one user changes

Changes Build 108.1.1.9 (from 2020-10-27):

• Fixed

  • 50641: When switching off a layer in the TOC in ArcGIS Pro the connection to the wO author standalone is lost
  • 50771: Performance problem when saving a project configuration due to incorrectly set log level when synchronizing base data to the UserManagement database

Changes Build 108.1.1.5 (from 2020-10-16):

• Fixed

  • 50414: WebOffice author ArcMap Connector causes a Windows error report to be generated when opening ArcMap and closing it without further action

Changes Build 108.1.1.4 (from 2020-10-06):

• Fixed

  • 50548: When importing and exporting a UserManagement database, no information messages are displayed

Changelog WebOffice author 10.8 SP1:

Changes Build 108.1.1.3 (from 2020-09-29):

• Fixed

  • 50561: Error after starting WebOffice author, if no profile has been created on the computer

Changes Build 108.1.1.1 (from 2020-09-24):

• Fixed

  • 50385: The “Save Project” button is always active when opening a project
  • 50427: At Layer/table mapping, the option "“Delete all not matching layers including all references” will delete the references but not the layers
  • 50509: WebOffice author crashes without any error message when copying/pasting child nodes of a map service
  • 50513: Wizard “Define selectable/identifiable layers” leads to problem
  • 50519: The function for cleaning up a User Management database should show a progress bar to indicate background activities

• Changed

  • 50350: UserManagement database connection (= GeoProject.dll) for WebOffice 10.8 SP1

Changes Build 108.0.0.54 (from 2020-09-15):

• Fixed

  • 50398: Validation warnings are only displayed briefly after the changes due #49074
  • 50460: When fixing a validation warning, the scrollbar is no longer moved to the corresponding line since the changes due #49074

Changes Build 108.0.0.52 (from 2020-09-10):

• Fixed

  • 35689: Various small corrections and optimizations for the Undo/Redo function

Changes Build 108.0.0.51 (from 2020-09-03):

• Fixed

  • 50399: Saving the application configuration is no longer possible after #49074.

• Changed

  • 50261: The wizard “Add layer to map view” should not transfer display names to map views for layers

Changes Build 108.0.0.49 (from 2020-09-02):

• Fixed

  • 50354: Considerable performance optimization, if an extremely large number of layers are configured under Queries and during Layer mapping

Changes Build 108.0.0.46 (from 2020-08-28):

• Added

  • 35689: Support for undo/redo functionality
  • 49930: Layer validation: Support for deleting layers including all references

• Fixed

  • 49074: Considerable performance optimization regarding memory consumption and CPU usage by a fundamental redesign
  • 50043: Saving an application profile ignores the entries regarding UserManagement database connection the first time

Changes Build 108.0.0.42 (from 2020-08-06):

• Fixed

  • 50233: Error when exporting a UserManagement database

Changes Build 108.0.0.41 (from 2020-08-02):

• Fixed

  • 50167: If a project is closed with the “Close” button, it is possible that a project has not been saved although this was selected in the dialog before
  • 49321: Within combo boxes it is sometimes not possible to scroll

Changes Build 108.0.0.37 (from 2020-07-24):

Fixed

• 50057: The list of connected and disconnected map services should be displayed in a separate window and not in a tooltip on mouseover, so that more than 50 map services are possible
• 50135: If a layer is renamed in a linked map document, the save button in the WebOffice author standalone should be activated automatically

Changes Build 108.0.0.35 (from 2020-07-07):

• Fixed

  • 50066: Many validation warnings, because the connection to the map services get lost

Changes Build 108.0.0.34 (from 2020-07-06):

• Fixed

  • 49410: Small error correction when opening several WebOffice projects at the same time
  • 49900: Optimization, so that after a longer idle time the CPU load does not increase extremely

Changes Build 108.0.0.32 (from 2020-06-19):

• Changed

  • 49792: General: Change of the ArcGIS Pro Connector system requirements to ArcGIS Pro 2.5

Changes Build 108.0.0.30 (from 2020-06-10):

• Fixed

  • 49937: Performance optimization for opening the menu for transferring map views

Changes Build 108.0.0.29 (from 2020-06-09):

• Fixed

  • 49773: ArcMap Connector (= 32bit) does not work (in the 64bit version of WebOffice author standalone)

Changes Build 108.0.0.28 (from 2020-05-27):

• Fixed

  • 49792: Crash of ArcGIS Pro, if the connector to the WebOffice author standalone is activated
  • 49878: Optimization of the function “Check all projects”

Changes Build 108.0.0.26 (from 2020-05-26):

• Fixed

  • 49873: WebOffice author standalone can lose the connection to map services if a project contains a lot of map services

Changes Build 108.0.0.23 (from 2020-05-25):

• Fixed

  • 49880: Create Project Wizard: Crash at the end of the wizard

Changes Build 108.0.0.18 (from 2020-05-13):

• Fixed

  • 49792: ArcGIS Pro Connector does not work
  • 49646: Update of the WebOffice website to https://weboffice.vertigis.com/en/

Changes Build 108.0.0.16 (from 2020-05-08):

• Fixed

  • 49669: Value of a changed parameter is not accepted if you clicked on Save too quickly
  • 49693: After saving when editing multiple projects together, the WebOffice author did not respond
  • 49720: Export of a user management database in SQLite format fails
  • 49504: WebOffice author standalone cannot be started correctly

• Changed

  • 49394: UserManagement database connection (= GeoProject.dll) for WebOffice 10.8
  • 49653: Change of the manufacturer certificate stored in the setup to “VertiGIS GmbH”
  • 49703: Remove support for MS Access as user management database
  • 49740: Change the working directory to %APPDATA%/VertiGIS/WebOfficeAuthorStandalone
  • 49760: Installation path for 64bit version of WebOffice author should be the 64bit program folder

Changelog WebOffice author 10.7 SP1+:

Changes Build 107.1.1.33 (from 2020-04-27):

• Fixed

  • 49359: The assignment of layers in the layer validation has no effect if the name of a layer in ArcMap has been changed without an open WebOffice author instance

Changes Build 107.1.1.28 (from 2020-04-17):

• Fixed

  • 49422: The WebOffice author standalone does not sort the Layer IDs in ArcGIS Pro projects

Changes Build 107.1.1.27 (from 2020-04-03):

• Fixed

  • 45619: Prolongation of the manufacturer certificate, which is included in the setup

Changes Build 107.1.1.26 (from 2020-03-24):

• Changed

  • 49176: Below a configuration element “Export profile raster data: GeoTIFF” an “ArcGIS Server Map Export Geoprocessing Service” should be created automatically when executing the function “Check all projects” - see also ticket #49310 in the changelog of the WebOffice application server

Changes Build 107.1.1.25 (from 2020-03-10):

• Added

  • 49065: Support to prevent simultaneous editing of WebOffice project configurations - see: Settings of a wO author standalone application profile

• Fixed

  • 49314: Staging: Changing a server URL does not work correctly if a URL occurs multiple times in a project

Changes Build 107.1.1.23 (from 2020-03-05):

• Fixed

  • 49065: Small layout optimizations of the parameters regarding configuration of all intervals and timeouts of the synchronization processes running in the background

Changes Build 107.1.1.20 (from 2020-03-02):

• Fixed

  • 49065: Optimization of the sequence of the new parameters with regard to the configuration of all intervals and timeouts of the (synchronization) processes running in the background

Changes Build 107.1.1.19 (from 2020-02-28):

• Added

  • 49065: Support for the configuration of all intervals and timeouts of (synchronization) processes running in the background - see: Settings of a wO author standalone application profile - this new option can be used to alleviate performance bottlenecks in certain scenarios

• Fixed

  • 48938: Various smaller performance optimizations

Changes Build 107.1.1.17 (from 2020-02-25):

• Fixed

  • 48965: After a layer validation the save button is not active

Changes Build 107.1.1.15 (from 2020-02-06):

• Fixed

  • 48938: For performance reasons (= CPU usage) WebOffice author standalone should validate the opened project configuration against the schema only every 2min (instead of 45sec)

Changes Build 107.1.1.14 (from 2020-01-31):

Fixed

• 48938: Performance optimization until the configuration parameters are displayed in the generic edit mode - especially interesting if there are a very high number of layers in a WebOffice project configuration

Changes Build 107.1.1.13 (from 2020-01-14):

• Fixed

  • 48868: Layer validation: The function “Delete all unavailable layers” also deletes valid references

Changes Build 107.1.1.11 (from 2020-01-08):

• Fixed

  • 48866: No configuration parameters are displayed in the generic editing mode, if e.g. several map views have the same name

Changes Build 107.1.1.10 (from 2019-12-20):

• Added

  • 47445: Support to work on several projects at the same time - BETA!

• Fixed

  • 47671: In generic editing mode, elements are inserted at the beginning and not at the end when copying/pasting searches/queries

Changelog WebOffice author 10.7 SP1:

Changes Build 107.1.1.2 (from 2019-12-11):

• Fixed

  • 48769: WebOffice project configuration not valid after “Import service fields”

• Changed

  • 48604: UserManagement database connection (= GeoProject.dll) for WebOffice 10.7 SP1
  • 48715: Print Layout Designer from 20191129

Changelog WebOffice author 10.7+:

Changes Build 107.1.0.124 (from 2019-12-04):

• Fixed

  • 48592: In certain cases, no GeoProcessing tool “Utilities/PrintingTools” was created for the “Export Map” or “Routing” tool

Changes Build 107.1.0.117 (from 2019-11-28):

• Fixed

  • 48013: A project configuration created with the Create Project Wizard is not valid because no GeoProcessing tool “Utilities/PrintingTools” was created for the “Export Map” tool

Changes Build 107.1.0.116 (from 2019-11-26):

• Fixed

  • 48013: With the function “Check all projects” the migration of the WebOffice project configurations to version 10.7 cannot be performed because project configurations are marked as invalid

Changes Build 107.1.0.114 (from 2019-11-25):

• Fixed

  • 48674: Small optimization regarding the cleaning of a user management database from orphaned entries

Changes Build 107.1.0.113 (from 2019-11-21):

• Fixed

  • 47716: Further optimizations when transferring map views from the ArcGIS map document to the WebOffice project configuration

Changes Build 107.1.0.111 (from 2019-11-18):

• Fixed

  • 47343: The warnings if several services with the same name are stored in the UserManagement database should only be output if this is the case for at least one service

Changes Build 107.1.0.108 (from 2019-11-15):

• Fixed

  • 48609: The function “Check all projects” should supplement non-existent IDs

Changes Build 107.1.0.105 (from 2019-11-11):

• Added

  • 43371: Support for integration wizard for creating hyperlinks, external applications and proOffice-couplings - Final

• Fixed

  • 47343: A warning should be issued if several services with the same name are stored in the UserManagement database
  • 48515: For color dialogs, a stored default value should also be displayed accordingly

Changes Build 107.1.0.102 (from 2019-11-04):

• Fixed

  • 43371: Integration Wizard: Updating the stored proOffice entities and proOffice icons

Changes Build 107.1.0.98 (from 2019-10-17):

• Added

  • 43371: Support for integration wizard for creating hyperlinks, external applications and proOffice-linkages - Beta!

• Fixed

  • 47716: The transfer of a map view with the option “Transfer only visible group layers” should not transfer invisible layers
  • 48342: The notification “Uniqueness of X layer identifiers in the map Y is reconstituted automatically!” of the ArcMap Connector is not correct

Changes Build 107.1.0.91 (from 2019-10-10):

• Fixed

  • 48294: When upgrading WebOffice project configuration, no error message should be issued for problems that are resolved by the upgrade

Changes Build 107.1.0.89 (from 2019-10-08):

• Fixed

  • 48273: Implementation of a check whether WebOffice author standalone did not create unnecessary entries in the Windows registry due to a bug in an older version

Changes Build 107.1.0.88 (from 2019-10-02):

• Fixed

  • 48231: At the checking functionality in the UM-DB staging process, hints should be given about problems with the upper/lower case of IDs
  • 48239: Due to a regression almost all buttons in the ArcMap toolbar are grayed out and are not available

Changes Build 107.1.0.85 (from 2019-10-01):

• Fixed

  • 46193: Minor optimizations when creating a project configuration based on a WebMap

Changes Build 107.1.0.83 (from 2019-09-27):

• Fixed

  • 48162: The staging process without a user management database connection should not check for a target database
  • 48173: When migrating to WebOffice 10.7, a GeoProcessing tool for creating a routing PDF should be created automatically if the corresponding tool is configured
  • 48184: Configured passwords should also be copied as hashed values when copying nodes (MapServices, database connections)

Changes Build 107.1.0.78 (from 2019-09-13):

• Added

  • 48083: Setup: Support for installing SynerGIS Printing Layout Designer

Changes Build 107.1.0.72 (from 2019-09-09):

• Added

  • 47014: Support for new wizard to clean the user management database from orphaned entries

• Changed

  • 47821: If a multilingual attribute of a released language is not set, a validation error should be output instead of a validation warning

Changes Build 107.1.0.68 (from 2019-09-03):

• Fixed

  • 47639: Query Wizard: Changes in the result field sequence are not taken into account
  • 47716: The transfer of a map view with the option “Transfer only visible group layers” is not correct

Changelog WebOffice author 10.7:

• see What’s New in WebOffice 10.7

Changelog WebOffice author 10.6 R2 SP2+:

Changes Build 106.2.2.191 (from 2019-07-26):

• Fixed

  • 42717: Annotation layers should only be able to be configured as group layers

Changes Build 106.2.2.188 (from 2019-07-24):

• Fixed

  • 47718: In the generic edit mode, no print templates are displayed at the “Print” entry point if the Print tool is grouped

Changes Build 106.2.2.168 (from 2019-07-15):

• Added

  • 47645: Create Project Wizard: Support for adding selected pre-configured ArcGIS VectorTile services

• Fixed

  • 47615: The search wizard does not adopt the search category correctly
  • 47618: Optimization of heuristics for automatic correction when pasting copied references
  • 47655: Group layers set to “not visible” in MXD are also taken over as “not visible” for the TOC with the wizard

Changes Build 106.2.2.154 (from 2019-07-09):

• Added

  • 45992: Support for editing existing print settings using Wizard

Changes Build 106.2.2.145 (from 2019-07-05):

• Fixed

  • 47569: Error at end of project create wizard, if no project language has been set before
  • 47576: Once opened, projects remain grayed out in the Load Projects menu after closing and can no longer be opened
  • 47579: Error message regarding not implemented data connection “ArcGIS.Core.CIM.CIMRelQueryTableDataConnection”

Changes Build 106.2.2.137 (from 2019-07-01):

• Added

  • 46522: Support for ArcGIS Pro 2.4

• Fixed

  • 47534: Connections to ArcMap or ArcGIS Pro are initially not visible in the connection selection

Changes Build 106.2.2.132 (from 2019-06-26):

• Fixed

  • 47014: Small background optimizations on the tool for cleaning up the UserManagement database

Changes Build 106.2.2.129 (from 2019-06-24):

• Fixed

  • 47504: Optimization of the error message if a JDBC table and an ArcGIS Server map service have been assigned the same ID due to manipulation of the project configuration

Changes Build 106.2.2.123 (from 2019-06-19):

• Fixed

  • 47449: Performance optimization when saving projects if the selected project language has not yet been translated

Changes Build 106.2.2.116 (from 2019-06-11):

• Fixed

  • 47420: Performance improvement when synchronizing base data into the UserManagement database

Changes Build 106.2.2.109 (from 2019-05-31):

• Added

  • 46718: Support for groups and for filtering tools

• Fixed

  • 47089: The menu for selecting the popup window options is not yet available
  • 47120: The synchronization of users between two user management databases does not work
    
  • 47175: At “Add all layers as ArcGIS layer” under “Queries” no group layers may be taken over
  • 47305: Error message “ArcGIS.Core.CIM.CIMRouteEventDataConnection” by the ArcGIS Pro Connector

• Removed

  • 47355: Remove link to WebOffice flex (Adobe Flash) from the wO publishing dialog

Changes Build 106.2.2.89 (from 2019-05-16):

• Fixed

  • 46969: Incorrect opening of two projects at the same time

Changes Build 106.2.2.88 (from 2019-05-13):

• Fixed

  • 47168: If the dialog for transferring the TOC from ArcMap is already open, subsequent changes in the TOC are ignored
  • 47175: At “Add all layers as ArcGIS layer” under “Queries” no group layers may be taken over
  • 47217: High CPU utilization at “Delete all not matching layers” after previous modification of the project configuration

Changes Build 106.2.2.77 (from 2019-05-08):

• Added

  • 47069: Support for outputting feedback when importing and exporting the WebOffice UserManagement database and when synchronizing users

• Fixed

  • 44900: Although a different password was entered in the password validation field, the project configuration can be saved
  • 46994: WebOffice author standalone crashes when opening project configurations that do not have a “noNamespaceSchemaLocation” attribute
  • 47101: When transferring the TOC to an existing map view, existing elements are to be displayed in bold style

Changes Build 106.2.2.72 (from 2019-04-26):

• Fixed

  • 47101: When transferring the TOC to an existing map view, existing elements are to be displayed in bold style

• Changed

  • 47110: Change to Microsoft Translator Text API Version 3 (V3)

Changes Build 106.2.2.65 (from 2019-04-17):

• Changed

  • 46720: Various optimizations for the filter function in the generic edit mode
  • 46935: The automatic layer ID sorting should/must also include annotation sublayers
  • 47008: When communicating with the Microsoft Translator API, the IWA credentials should be sent with the request so that a proxy server that requires authentication does not block the requests

Changes Build 106.2.2.52 (from 2019-04-15):

• Changed

  • 47008: In debug mode, you should be able to log requests (including token retrievel) against the Microsoft Translator API when translating a WebOffice project configuration

Changes Build 106.2.2.51 (from 2019-04-12):

• Changed

  • 46999: At “Check all projects” the WebOffice application configuration should also be updated
  • 47008: In debug mode, you should be able to log requests against the Microsoft Translator API when translating a WebOffice project configuration

Changes Build 106.2.2.47 (from 2019-04-10):

• Added

  • 45621: Support to install a new version of WebOffice author standalone without uninstalling it, i.e. to update it directly
  • 46933: Support to trigger the automatic sorting of layer IDs manually - there is now a separate button in the ArcMap toolbar for this function

• Changed

  • 46954: At “Check all projects”, no warning should be issued for each project due to an existing write protection

Changes Build 106.2.2.40 (from 2019-04-08):

• Added

  • 45619: The WebOffice author standalone setups should have a certificate signed by the manufacturer so that no “Unknown Manufacturer” warning is issued during installation

Changes Build 106.2.2.36 (from 2019-04-05):

• Added

  • 45484: There should also be an own button in the ribbon bar for the layer validation
  • 46881: Support for adding predefined meeting point symbol sets

• Fixed

  • 46860: When switching between different elements, the expanded/minimized status is reset in generic edit mode
  • 46918: The function for translating a project configuration does not work correctly

Changelog WebOffice author 10.6 R2 SP2:

Changes Build 106.2.2.11 (from 29.03.2019):

• 46730: Copy elements with references to other project configurations optimized
• 46503: GeoProject.dll Update for WebOffice 10.6 R2 SP2

Changelog WebOffice author 10.6 R2 SP1+:

Changes Build 106.2.1.167 (from 21.03.2019):

• 46730: Optimizations so that configuration elements can be copied between two project configurations
• 46763: WebOffice author standalone cannot be opened multiple times in different sessions with the same user name on a terminal server

Changes Build 106.2.1.163 (from 19.03.2019):

• 44559: Missing or not labelled buttons in the extended color palette
• 46723: UserManagement Staging: Incorrect behavior if a forwardslash is “/” at the end of the URL

Changes Build 106.2.1.159 (from 18.03.2019):

• 46420: Further performance optimization when loading references, so that even particularly extensive project configurations can be worked on fluently
• 46703: Function “Check all projects” sets a write protection when updating projects, which will not be removed afterwards
• 46714: When importing GeoBookmarks from ArcMap, an invalid WebOffice project configuration is generated if there are no GeoBookmarks in the project yet

Changes Build 106.2.1.151 (from 15.03.2019):

• 44855: Support to synchronize all projects into the UserManagement database when checking all projects
• 45931: Support to add all edit fields at once in generic edit mode
• 46163: Support for logging network traffic with the WebOffice application
• 46420: Significant performance optimizations and CPU utilization reduction
• 46512: Layout optimization, so that the messages (= toast notifications) no longer overlay any buttons
• 46606: Optimization of the normalization of WMS services if the end of the URL is “?” ==> affected URLs must be normalized again by the administrator
• 46670: Annotation layers should be listed during filtering
• 46695: Group layers must not be available in the layer list for layer filters

Changes Build 106.2.1.126 (from 28.02.2019):

• 46486: Logging Optimization for Problems with the Connection to a User Management Database

Changes Build 106.2.1.124 (from 26.02.2019):

• 44855: Support for checking all projects

Changes Build 106.2.1.116 (from 25.02.2019):

• 46420: Various performance optimizations with regard to the project validation that is constantly running in the background

Changes Build 106.2.1.115 (from 22.02.2019):

• IN DEVELOPMENT - 44855: Support for checking all projects

Changes Build 106.2.1.102 (from 19.02.2019):

• 46315: In case of an error message due to a missing SSL certificate, a link to the corresponding tab of SynAdmin should be displayed

Changes Build 106.2.1.97 (from 14.02.2019):

• 46420: Various performance optimizations with regard to the project validation that is constantly running in the background
• 46476: UserManagement Staging: Support for storing mapping entries as JSON files under “C:<User>”

Changes Build 106.2.1.91 (from 12.02.2019):

• 46391: A click on the button “Take all extent values” at initial extent erroneously takes the full extent

Changes Build 106.2.1.88 (from 11.02.2019):

• 46132: Various optimizations for the wizards “Set Queries” and “Define selectable/identifiable layers”
• 46195: Support for saving and overwriting an ArcGIS web map

Changes Build 106.2.1.86 (from 08.02.2019):

• 45285: After opening a project, you should switch directly to the generic editing mode
• 46195: Support for saving and overwriting an ArcGIS web map

Changes Build 106.2.1.81 (from 05.02.2019):

• 44817: Generic Edit Mode: Support for editing and displaying selected nodes simultaneously

Changes Build 106.2.1.78 (from 04.02.2019):

• 46381: Add a link to the ArcGIS Online Assistant in the “WebMap” tab

Changes Build 106.2.1.75 (from 30.01.2019):

• 46226: UserManagement Staging: Optimizations for the support to check the uniqueness of the map services before executing the function
• 46373: The function to transfer the map extent from ArcMap only works once

Changes Build 106.2.1.73 (from 29.01.2019):

• 46335: The WebOffice author standalone no longer gives a hint if a project is already in use, means write-protected
• 46354: Search wizards: Add the comparison operators “>=” and “<=” to supported search fields

Changes Build 106.2.1.65 (from 28.01.2019):

• 46335: The WebOffice author standalone no longer gives a hint if a project is already in use, means write-protected

Changes Build 106.2.1.55 (from 25.01.2019):

• 44397: Generic edit mode: Support for adding all fields of a JDBC query as result- or search fields
• IN DEVELOPMENT - 44872: Generic edit mode: Avoid horizontal scrollbars in the window with the parameters
• 46331: Validation messages: A click on the warning should zoom to the corresponding element

Changes Build 106.2.1.49 (from 22.01.2019):

• 46100: SynAdmin should be opened with the configured UI language of the WebOffice author standalone

Changes Build 106.2.1.46 (from 22.01.2019):

• 46225: UserManagement Staging: Support to check the uniqueness of the map services before executing the function

Changes Build 106.2.1.42 (from 14.01.2019):

• IN DEVELOPMENT - 46195: Support for storing connections to Portal for ArcGIS as well as for saving and overwriting WebMaps
• 46237: Publishing Dialog: Timeout to be increased from 1min to 2min

Changes Build 106.2.1.35 (from 07.01.2019):

• 46123: UserManagement Staging: The table “UM_DATASOURCE” is not updated
• 46128: In copyright text increase year to 2019

Changes Build 106.2.1.29 (from 17.12.2018):

• 46006: Support for exporting validation warnings

Changes Build 106.2.1.28 (from 13.12.2018):

• 45311: Validation messages: Support for hints on configured layers, which are no longer available in the map service
• 46027: Custom Icons per Staging Workflow of the UserManagement Database

Changes Build 106.2.1.25 (from 12.12.2018):

• 46051: At a certain MXD, error messages of the WebOffice author standalone ArcMap Connectors are displayed continuously

Changes Build 106.2.1.22 (from 07.12.2018):

• 44266: Number of toast notifications to be reduced
• 45745: Support for checkbox which closes the publishing dialog automatically when clicking a link
• 45925: Create Project Wizard: Layout Problem when adding an Overview Map
• 45932: Performance optimization when loading very large project configurations
• 45939: The extract templates are to be synchronized automatically in the UserManagement database
• 45958: User name and password should be automatically in the generated URL in the publishing dialog of UserManagement light
• 46006: Various minor optimizations, e.g. for filtering in generic edit mode
• 46007: Search Wizard: Various layout problems when screen is not extremely large

Changelog WebOffice author 10.6 R2 SP1:

• 45290: Support for Search Wizards
• 45687: Create Project Wizard: If there is only one SynOutputService on a server, it should be preselected in the Create Project Wizard.
• 45724: GeoProject.dll Update for WebOffice 10.6 R2 SP1
• 45884: Performance optimization, if the WebOffice directory is configured via UNC path in the basic settings
• 45889: Validation messages: There is no SHAPE field on FeatureServer Services
• 45901: Create Project Wizard: SynOutputService should be added named as “Local Data”

Changelog WebOffice author 10.6 R2+:

Changes Build 106.2.0.250 (from 22.11.2018):

• IN DEVELOPMENT - 45290: Support for Search Wizards
• 45687: Create Project Wizard: If there is only one SynOutputService on a server, it should be preselected in the Create Project Wizard
• 45691: Usability optimization when using Drag&Drop for map views
• 45704: Create Project Wizard: New projects are not automatically synchronized to the user management database
• 45786: Transfer of the current area of map documents (ArcGIS Pro, ArcMap) to the GeoLocator search area
• 45796: Performance optimization when loading extremely large project configurations
• 45870: Small optimization “Save As” dialog

Changes Build 106.2.0.236 (from 07.11.2018):

• 45720: When renaming a layer in the map document, the references in the wO project configuration are not correctly adopted
• 45749: WebOffice author standalone crashes when transferring the TOC from ArcMap
• 45751: Copying layer and layer groups to other map view does not work

Changes Build 106.2.0.232 (from 06.11.2018):

• 45669: If WebOffice author standalone is installed on a computer, the license dialog of the WebOffice extensions authors must be suppressed ==> Important: requires WebOffice extensions 10.6 R2 SP1!
• IN DEVELOPMENT - 45720: When renaming a layer in the map document, the references in the wO project configuration are not correctly adopted

Changes Build 106.2.0.223 (from 24.10.2018):

• 45529: Open project: The currently opened project configuration should be kept in the project list
• 45670: Selectable/Identifiable Layer Wizard: The list should be sortable
• 45677: Support for synchronizing VectorTile Services with the UserManagement Database

Changes Build 106.2.0.219 (from 22.10.2018):

• 45606: Performance optimization for the tree view UI
• 45651: WebOffice author should appear in the task manager as “WebOffice author standalone” and not as “WOAS.Standalone”

Changes Build 106.2.0.217 (from 19.10.2018):

• IN DEVELOPMENT - 44982: Various optimizations for communication between WebOffice author standalone and the WebOffice REST interface when the ArcGIS Server is federated with a portal
• 45596: Support for easy creation of a project list in the application configuration via context menu
• 45609: Various optimizations in the menus for UserManagement Staging
• 45641: Problem changing the WebOffice default value of the “Use scale bar” parameter from ‘true’ to ‘false’

Changes Build 106.2.0.210 (from 17.10.2018):

• IN DEVELOPMENT - 45606: Performance optimization for validation when clicking on attributes with value lists
• 45609: UserManagement Staging: Support for saving the mapping between staging and production in the Windows registry (per user on one computer)

Changes Build 106.2.0.205 (from 10.10.2018):

• 45535: Implement check that the unique WebOffice Layer Identifiers are really unique in a WebOffice project configuration

Changes Build 106.2.0.203 (from 09.10.2018):

• 44611: Optimization for importing coordinates from the current map extent of ArcGIS Desktop documents
• 44685: Support for adding all layers on the following configuration elements in generic edit mode: Snap Layer, Dynamic Legend, Filter Layer, Search Layer, Edit Layer
• 45499: Publishing Dialog: Add QR Code for FlexJS Client
• 45526: Selection via SHIFT key overrides subsequent deselection of elements via Ctrl key
• 45527: When adding the standard elements title or organization to print templates, the fields “Identification of field name” and “Identification of field content” are erroneously empty and editable

Changes Build 106.2.0.196 (from 07.10.2018):

• 45507: Create project wizard generates invalid WebOffice project configurations

Changes Build 106.2.0.195 (from 05.10.2018):

• 44815: Optimizing the order of configuration parameters in Generic Edit Mode
• 45479: Error when using OGC services (WFS, WMS, WMTS) in the project configuration when cleaning the UserManagement database
• 45499: Publishing Dialog: Add QR Code for FlexJS Client

Changes Build 106.2.0.186 (from 03.10.2018):

• 45468: Various optimizations for the wizard “Show missing searchfields/searchfield indices”

Changes Build 106.2.0.179 (from 01.10.2018):

• 43802: UserManagement Staging: Optimization of the dialog for changing the password
• 44611: Support for taking over the current map extent from the MXD incl. optimization of decimal places per unit of the coordinate system
• 44762: Optimizing the Selectable/Identifiable Layer Wizard
• 45301: A logo should be displayed immediately after the WebOffice author Standalone is started
• 45427: Multiple layer cannot be assigned during layer validation

Changes Build 106.2.0.171 (from 19.09.2018):

• 45080: Basic refactoring of communication between WebOffice application server and WebOffice author Standalone ==> Note: requires at least WebOffice 10.6 R2 cumulative patch with build time: 24.09.2018 - 17:39
• 45271: Error “Access to this resource is not allowed” in layer and table assignment
• 45284: Optimizing the order of validation warnings

Changes Build 106.2.0.168 (from 11.09.2018):

• IN DEVELOPMENT - 45216: A warning is erroneously issued for print templates that the combination of some parameter must be unique

Changes Build 106.2.0.166 (from 08.09.2018):

• 44611: Support for importing coordinates from the current map of ArcGIS Desktop documents

Changes Build 106.2.0.163 (from 05.09.2018):

• 45234: Installer should activate ArcMap Connector for WebOffice author (ArcMap) automatically
• 45248: Support for deleting mandatory fields

Changes Build 106.2.0.160 (from 04.09.2018):

• IN DEVELOPMENT - 44611: Support for importing coordinates from the current map of ArcGIS Desktop documents
• 45234: Support for unattended installation (= Silent Installation) using the new parameters “INSTALLCONNECTORARCMAP” and “INSTALLCONNECTORPRO”

Changes Build 106.2.0.156 (from 31.08.2018):

• 45181: Enhancement of validation messages by a warning if the SHAPE field is not available on a layer
• 45197: Optimization of the order of the WebOffice clients in the publishing dialog

Changes Build 106.2.0.152 (from 30.08.2018):

• 45062: Support for categorizing validation warnings
• 45110: Significant performance improvement when a very high number of map services are used in a project configuration

Changes Build 106.2.0.147 (from 24.08.2018):

• 44972: Various optimizations for “Customize Language Bundle”

Changes Build 106.2.0.141 (from 22.08.2018):

• 45063: Setting the User Management database productively does not work, because the table “um_service” is empty
• 45085: WebOffice author Standalone ArcMap Connector must not rename Annotation Sublayer to ensure unique layer identifiers

Changes Build 106.2.0.137 (from 21.08.2018):

• 45076: In the tab “File // Settings” the configuration options for the connection to the UserManagement database are missing

Changes Build 106.2.0.135 (from 03.08.2018):

• 44949: Application Profile Wizard: A password is requested although one has already been specified
• 44957: Generic edit mode: When you try to type a space in a parameter field, the entire value may be deleted and replaced by a “0”

Changelog WebOffice author 10.6 R2:

• 42025: Implement boolean attributes as checkbox
• 43360: Support for a Range Slider for altitude information
• 43475: Integration of web map services (incl. improvement of error handling)
• 44121: Map Services connection - implementation
• 44380: Implementing Guided Wizards (Configuration Helpers)
• 44473: Create Project Wizard - Query service from the REST interface
• 44653: Link to documentation changed to WebOffice 10.6 R2
• 44658: TreeView: Click on item scrolled to the left position of the item (horizontal)
• 44672: Protection for the REST API used by the author
• 44694: Map Service Connections Wizard: select all
• 44695: Scrolling with mouse not possible with editing layer
• 44696: Map Service Connections Wizard: Normalized server is not updated
• 44697: The password input field is always filled, although empty
• 44698: Do not display user / password in the network server scenario in map service connections
• 44699: Implementation GetFeature-Info Configuration WebOffice Author
• 44701: Usability issues collected
• 44703: Troubleshooting card service staging
• 44704: Topic assignment http: List of unassigned topics Project does not correspond to the selection list Topic assignment
• 44708: Language Support: Support sorting by source/target language
• 44727: Support for filter row in “Wizard Staging // Clean up UserManagement database”.
• 44730: Wizards in the attributes menu should block the view
• 44746: Copying topics and topic groups to map views does not work
• 44751: Move by drag and drop incorrect
• 44755: Incorrect saving of a non-valid project configuration
• 44762: Creating a selectable/identifiable layer wizard
• 44766: Connection to the REST interface only works with one window
• 44788: Profile Import Wizard: Oracle DB connections are not transferred
• 44792: Create Profile - Wizard: Path to WebOffice project directory
• 44796: LayerIDs are only sorted correctly if they are not ascending
• 44801: Profile export: No default value for file name
• 44810: Oracle DB Connection: Test connection error on connection - Data is dirty
• 44838: Multi-user system sometimes prevents the author from starting standalone
• 44839: Translation of validation not yet complete
• 44842: Application Profile: Fixed problem with spaces in application profile settings
• 44851: SQLite: UM Sync via ArcMap not yet implemented
• 44852: Problems with obfuscation - Wizard does not appear
• 44881: No memory message when saving valid application configuration
• 44883: Configuration Wizard: Add Service - New service not transferable to new map view
• 44885: Step 3 and 4 of the Create Project Wizard implemented

Changelog WebOffice author 10.6:

Changes Build 106.1.0.203 (from 12.07.2018):

• 44687: Clicking the help button tries to open a non-existent help page
• 44695: Various optimizations when scrolling with the mouse wheel
• 44696: Map Service Connections Wizard: The normalized server URL is not updated

Changes Build 106.1.0.198 (from 09.07.2018):

• 44644: URLs of GeoLocator services are not correctly stored in the User Management database

Changes Build 106.1.0.193 (from 29.06.2018):

• 43994: Various optimizations for scrolling with the mouse wheel

Changes Build 106.1.0.192 (from 19.06.2018):

• 44427: Support for validation/consistency check of search and result fields ==> requires WebOffice 10.6 R2!
• 44439: WebOffice author Standalone can - until revoked - be installed under Windows 7 and Windows Server 2012 - Important: This does not imply that the final version of WebOffice author Standalone will still support these operating systems!

Changes Build 106.1.0.182 (from 05.06.2018):

• 44422: Support for customizing standard Flex client texts and general usability optimization of the menu “WebOffice Texts”
• 44454: Rename the name of the “WebOffice Texts” to “Customize Language Bundle”

Changes Build 106.1.0.175 (from 04.06.2018):

• 44422: Support for customizing standard Flex client texts and general usability optimization of the menu “WebOffice Texts”
• 44436: Basic settings: During password validation for the connection to the User Management database, a validation error is always given, although both passwords are identical
• 44438: WebOffice Translations: The column for the target language remains empty, although translation exists
• 44439: The minimum requirement for the operating system for WebOffice author Standalone is Windows Server 2008 R2 or Windows 8.1, because older operating systems do not provide the prerequisite for DPI awareness
• 44440: Generic Edit Mode: Parameters that are not explicitly configured should be displayed in italic as in WebOffice author (ArcMap)
• 44447: Basic Settings: There is no “Cancel” button in the menu for renaming an application profile
• 44448: Basic settings: It is possible to save an application profile without a name

Changes Build 106.1.0.165 (from 30.05.2018):

• 44205: Update to Infragistics NetAdvantage 2018 Vol. 1
• 44335: Support to automatically create all query or result fields in generic editing mode
• 44410: Support to add predefined ArcGIS online map services directly in generic editing mode
• IN DEVELOPMENT - 44422: Support for customizing standard Flex client texts and general usability optimization of the menu “WebOffice Texts”

Changes Build 106.1.0.144 (from 25.05.2018):

• 44344: It is not possible to change the protocol (http / https) in the staging function “Url / Paths”
• 44353: The function “Export data for support request” should include the file "WebOffice.log.1

Changes Build 106.1.0.134 (from 14.05.2018):

• 44300: Grey out “Save” button as long as a project or application configuration is not "dirty

Changes Build 106.1.0.123 (from 04.05.2018):

• IN DEVELOPMENT - 43527: Support for changing map service connections
• 44132: Support for importing the basic settings (= WebOffice author profile) from WebOffice author (ArcMap)

Changes Build 106.1.0.107 (from 25.04.2018):

• 40508: Support for easy change of basic settings (= WebOffice author profile)
• 44014: Support for displaying recently opened projects

Changes Build 106.1.0.99 (from 13.04.2018):

• 44103: Click on the “File” button should open “Open project” instead of "Create new project
• 44109: Deleting the only map service having mapped Layer Ids caused a validation error

Changes Build 106.1.0.93 (from 12.04.2018):

• 44075: Annotation sublayers should be excluded when correcting Layer IDs

Changes Build 106.1.0.88 (from 11.04.2018):

• 44025: It is not possible to change the contents of generic print fields
• 44049: Year in copyright to be increased to 2018
• 44060: Support for connections to an MSSQL database that require TLS 1.2
• 44081: When opening an MXD you get an error message from the ArcMap Connector

This changelog was created with Pandoc using Markdown according Keep a Changelog and Make a README.