AttribsNr > Attrib
Additionally to the representation of the blocks, attributes can be defined. These can be texts. By using the folder AttribsNr, the attributes defined in the header are controlled by numbering. The numbering begins with the number 1. The sequence or number of an attribute is determined in the header file in CAD. The folder AttribsNr is a subfolder of the folder Properties.
Property |
Description |
mandatory |
optional |
Layer |
Layer for the attribute. |
|
x |
LineType |
The line type of the attribute. |
|
x |
Color |
The color of the attribute. |
|
x |
Index |
Entry of the attribute number. If an attribute number is specified higher than the number of the attributes in the block definition, the attribute is not written. |
x |
|
Value |
The value the attribute is used with. |
|
x |
Rotation |
Rotation for the attribute. The rotation of the block definition is overwritten. |
|
x |
Height |
Text height for the attribute. The scaling of the block definition is overwritten. |
|
x |
XOffset |
X offset for the attribute. |
|
x |
YOffset |
Y offset for the attribute. |
|
x |
Day |
Attribute label for the attribute. The attribute label of the block definition is overwritten. |
|
x |
FollowFirstAtt |
Position under the previous attribute. |
|
x |
Position |
Insert position for the attribute. Values: Mid (corresponds to middle/middle), otherwise the position is taken from the block definition. |
|
x |
CoordX |
Absolute coordinate X. |
|
x |
CoordY |
Absolute coordinate Y. |
|
x |
CoordZ |
Absolute coordinate Z. |
|
x |